It must be installed on the rear bumper of the vehicle and must be located in the middle of the vehicle.
1.The size of Rear Marking Plate must meet the requirements of Australian regulations. It should be a rectangular, with a width of 340mm and a height of 110mm. The upper and lower edges should be a rounded rectangle.
2.Rear Marking Plate must be reflective and must meet the reflection requirements of Australia.
3.Rear Marking Plate must printed the registration number of a vehicle, which can facilitate other vehicles or law enforcement personnel to identify and find the vehicle.
4.Rear Marking Plate must be firmly installed on the rear bumper of the vehicle to ensure that it will not fall off during driving.
5.All vehicles must be installed with Rear Marking Plate, otherwise they will be considered illegal and may be fined or detained vehicles.
6.In short, Australia's Rear Marking Plate is a necessity for vehicles. Owners must comply with Australia's regulations, install and maintain the intact state of Rear Marking Plate.
